jueves, 20 de diciembre de 2012

Códigos de configuración SPA2102 y similares

Estos son los códigos de configuraciones de los Adaptadores telefónicos , se los pasó para aquellos que configuran, sistemas telefónicos con Asterisk,


ACTION
DIGITS
CHOICES
DESCRIPTION
Enter Interactive Voice
Response Menu

****


Use this command to enter the Interactive
Voice Response Menu. Do not press any
other keys until you hear, “Linksys
 configuration menu. Please enter the option
followed by the # (pound) key or hang up to
exit.”
Check Internet
Connection Type
100

Hear the Internet connection type of the
Phone Adapter.
Check Internet IP
Address
110


Hear the IP address assigned to the Phone
Adapter’s Internet (external) interface.
Check Network Mask
(or Subnet Mask)
120


Hear the network or subnet mask assigned to
the Phone Adapter.
Check Gateway IP
Address
130


Hear the IP address of the Phone Adapter
(usually the network router).
Check MAC Address
140

Hear the MAC address of the Phone Adapter
in hexadecimal string format.
Check Firmware
Version
150


Hear the version number of the firmware
currently running on the Phone Adapter.
Check Primary DNS
Server IP Address
160


Hear the IP address of the primary DNS
(Domain Name Service) server.
Check Internet Web
Server Port
170


Hear the port number of the Internet Web
server used for the Web-based Utility.
Check Local IP
Address
210


Hear the local IP address of the Phone
Adapter.
Set Internet
Connection Type
101

Press 0 to use DHCP.
Press 1 to use a static IP
address.
Press 2 to use PPPoE.
Select the type of Internet connection you are
using. Refer to the documentation supplied
by your Internet Service Provider (ISP).
Set Static IP Address
111

Enter the IP address using
numbers on the telephone
keypad. Use the * (star)
key when entering a
decimal point.
First, set the Internet Connection Type to
static IP address; otherwise, you will hear,
“Invalid Option,” if you try to set the static IP
address.
Set Network (or
Subnet) Mask
121

Enter the network or
subnet mask using
numbers on the telephone
keypad. Use the * (star)
key when entering a
decimal point.
First, set the Internet Connection Type to
static IP address; otherwise, you will hear,
“Invalid Option,” if you try to set the network or subnet mask.
Set Gateway IP
Address
131

Enter the IP address using
numbers on the telephone
keypad. Use the * (star)
key when entering a
decimal point.
First, set the Internet Connection Type to
static IP address; otherwise, you will hear,
“Invalid Option,” if you try to set the gateway   IP address.
Set Primary DNS
Server IP Address
161

Enter the IP address using
numbers on the telephone
keypad. Use the * (star)
key when entering a
decimal point.
First, set the Internet Connection Type to
static IP address; otherwise, you will hear,
“Invalid Option,” if you try to set the IP
   address of the primary DNS server.
Set the Mode
201

Press 0 to select the
router/NAT mode.
Press 1 to select the
bridge/switch mode.

f the Phone Adapter acts as the router for
your network, use the router/NAT mode.

If your network already has a router, use the
bridge/switch mode.
Enable/Disable WAN
Access to the
Web-based Utility
7932

Press 1 to enable.
Press 0 to disable.

Use this setting to enable or disable WAN
access to the Web-based Utility. (This Utility
lets you configure the Phone Adapter.)
Manual Reboot
732668


After you hear, “Option successful,” hang up the phone. The Phone Adapter will
automatically reboot.
Factory Reset
73738

Press 1 to confirm.
Press * (star) to cancel.

If necessary, enter the password. The Phone
Adapter will request confirmation; enter 1 to
confirm. You will hear, “Option successful.”
Hang up the phone. The Phone Adapter will
reboot, and all settings will be reset to their
factory default settings.
User Factory Reset
877778

Press 1 to confirm.
Press * (star) to cancel.

The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, “Option successful.” Hang up the phone. The Phone  Adapter will reboot and all user-configurable settings will be reset to their factory default settings.

Entering a Password

You may be prompted to enter a password when you want to reset the Phone Adapter to its factory default settings. To enter the password, use the phone’s keypad, and follow the appropriate instructions.

• To enter A, B, C, a, b, or c — press 2.
• To enter D, E, F, d, e, or f — press 3.
• To enter G, H, I, g, h, or i — press 4.
• To enter J, K, L, j, k, or l — press 5.
• To enter M, N, O, m, n, or o — press 6.
• To enter P, Q, R, S, o, q, r, or s — press 7.
• To enter T, U, V, t, u, or v — press 8.
• To enter W, X, Y, Z, w, x, y, or z — press 9.
• To enter all other characters, press 0.


Espero les sea de utilidad..